Apply Now

CCNP ROUTE

Cisco Certified Network Professional (CCNP) Routing and Switching certification validates the ability to plan, implement, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless and video solutions.

The CCNP Routing and Switching certification is appropriate for those with at least one year of networking experience who are ready to advance their skills and work independently on complex network solutions.

Those who achieve CCNP Routing and Switching have demonstrated the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician.

The routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

IP ADDRESSING

  • VLSM
  • Summarization
  • Supernetting
  • Tips & Tricks
  • Concept of Unicast / Broadcast & Multicast

–

ICMP Message

  • Echo Request
  • Echo Reply
  • Destination Host Unreachable / Transit Failure
  • Reply from A.B.C.D. Host Unreachable
  • ARP / Proxy ARP

–

PATH Selection

  • Route Selection components
  • – LM
  • – AD
  • – METRIC
  • Route selection process

–

Static Routing

  • Configure and verify static route
  • Configure and verify default route
  • Configure and verify Float route
  • Configure and verify summary route
  • Configure and verify Balance route

–

Routing Information Protocol (RIP)

  • Configure and verify Auto, No-Auto & Manual Summary
  • Configure and verify Passive Interface
  • Verify Split-horizon , Route-Poison, Poison-reverse, Flash Update
  • Configure and verify Route-filtering
  • Configure and verify RIP Default Route
  • Configure and verify RIP Timers
  • Configure and verify Load Balance Per packet

–

OPEN SHORTEST PATH FIRST (OSPF)

  • Configure and verify OSPF soft RID & Hard RID
  • Configure and verify OSPF Route Codes
  • Configure and verify OSPF Metric-type
  • Configure and verify OSPF Cost calculation
  • Configure and verify ABR & ASBR
  • Configure and verify DR & BDR
  • Configure and verify OSPF Load Balance Per Packet
  • Configure and verify OSPF Authentication
  • Configure and verify OSPF Hello, Dead, Area ID mismatch
  • Configure and verify OSPF Summarization on ABR & ASBR
  • Configure and verify OSPF Default Route
  • Configure and verify OSPF Route Filtering
  • Configure and verify OSPF Virtual-Link(Area 0 Discontiguous)
  • Configure and verify Passive Interface
  • Verify OSPF Router States
  • Verify OSPF Packet types
  • Verify OSPF DATABASE (LSA Types 1,2,3,4,5,7)
  • Configure and verify OSPF Stub, Totally stub
  • Configure and verify OSPF NSSA, Totally NSSA
  • Configure and verify OSPF path preference

–

Enhanced Interior Gateway Routing Protocol (EIGRP)

  • Configure and verify EIGRP soft RID & Hard RID
  • Configure and verify Auto, No-Auto & Manual Summary
  • Configure and verify EIGRP Route Filtering
  • Configure and verify EIGRP Authentication
  • Configure and verify EIGRP Default Route
  • Configure and verify EIGRP Load Balance Per Packet
  • Verify EIGRP DUAL Components
  • Verify EIGRP metric calculation
  • Configure and Verify Variance factor
  • Configure and Verify EIGRP Stub
  • Configure and verify Passive Interface
  • Verify EIGRP Packets
  • Verify Split-horizon
  • Describe SIA ,SIA-Q,SIA-R

–

IPv4 Redistribution

  • Explain Following Terms:
  • .ROUTE maps ( match & set statement)
  • .Access control list ( standard, extended)
  • .Prefix-list
  • .Tag
  • Mutual Redistribution between RIP, OSPF, EIGRP, BGP. Connected Static
  • Mutual Redistribution of RIP with OSPF, EIGRP, BGP, Connected, Static
  • Mutual Redistribution of OSPF with EIGRP, BGP, Connected, Static
  • Mutual Redistribution of EIGRP with BGP, Connected, Static
  • Mutual Redistribution of BGP Connected, Static

–

Boarder Gateway Protocol (BGP)

  • BGP Introduction
  • BGP Packet
  • BGP Public & Private ASN
  • Explain BGP attributes
  • Explain best-path selection
  • Configure and verify IBGP & EBGP Peering
  • Configure and verify BGP Implementation
  • Configure and verify BGP Authentication
  • Configure and verify BGP Aggregation
  • Configure and verify BGP Default Route Filtering
  • Verify BGP Router States
  • Configure and verify Outgoing Traffic Policy via WEIGHT
  • Configure and verify Outgoing Traffic Policy via Local Preference
  • Configure and verify Outgoing Traffic Policy via AS Path-Prepend
  • Configure and verify Outgoing Traffic Policy via MED
  • Configure and verify Peer group

–

Configure and verify IPv4 Network Address Translation (NAT)

  • Configure and verify Static NAT
  • Configure and verify Dynamic NAT
  • Configure and verify PAT

–

VPN Technologies

  • VPN Introduction
  • Configure and verify Frame-Relay
  • Configure and verify GRE
  • Configure and verify VRF-Lite
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

–

Dynamic Host Configuration Protocol (DHCP)

  • Explain DORA Process
  • Configure and verify DHCP Server
  • Configure and verify DHCP Client
  • Configure and verify DHCP Relay Agent ( ip helper addres)

–

Policy-Based Routing

  • Configure and verify PBR in IGP
  • Describe SLA
  • Configure and verify IP SLA (ICMP)
  • Configure and verify tracking objects

–

Pont-to-Point Protocol (PPP)

  • Configure and verify PPP Authentication (PAP, CHAP)

–

IPv6 Routing Protocols

  • Drawback of IPV4
  • Introduction of IPV6
  • IPV6 Formate
  • IPV6 Host Bits — EUI-64
  • IPV6 Addressing Rules
  • IPv6 loopback address
  • IPV6 Packet Types
  • Types of IPv6 Address
  • Multicast address for IPv6 address
  • IPv6 Routing Protocols
  • IPv4 to IPv6 migration techniques
  • Use of IPv6 in Different Fields
  • IPv6 address configuration on CISCO Router
  • Configure and verify IPv6 static Route
  • Configure and verify IPv6 Default Route
  • Configure and verify IPv6 Float route
  • Configure and verify IPv6 summary route
  • Configure and verify IPv6 Balance route
  • Configure and verify IPv6 RIPng
  • Configure and verify IPv6 OSPFv3
  • Configure and verify IPv6 EIGRPv6
  • Configure and verify IPv6 traffic filter

–

How to Manage Cisco Devices

  • Telnet, HTTP, HTTPS, SSH,
  • TFTP
  • SNMP ( v2 & v3)
  • Local logging, syslog,
  • Timestamps
  • NTP master, client, (v3 & v4), NTP authentication
  • AAA with TACACS+ and RADIUS