MPLS Syllabus

GRE

  • 1: Single GRE tunnel
  • 2: Dual GRE tunnel with different routing protocols in Customer sites.
  • 3: Dual GRE tunnel with same routing protocols in Customer sites.
  • 4: Uses of distribute-list for network prefix virtualization.
  • 5: Dual GRE tunnel with same routing protocols in Customer site having overlapping IP subnet.
  • 6: Configuring VRF & Troubleshooting of VRF

VRF

  • 7: Check VRF table, ping, Traceroute, Telnet etc…
  • 8: Configuring VRF Static
  • 9: Configuring VRF RIP
  • 10: Configuring VRF OSPF
  • 11: Configuring VRF EIGRP
  • 12: Configuring VRF BGP
  • 13: Configuring PE (vrf) to CE (non-vrf) Static Routing
  • 14: Configuring PE (vrf) to CE (non-vrf) RIP Routing
  • 15: Configuring PE (vrf) to CE (non-vrf) OSPF Routing
  • 16: Configuring PE (vrf) to CE (non-vrf) EIGRP Routing
  • 17: Configuring PE (vrf) to CE (non-vrf) BGP Routing

VRF REDISTRIBUTION

  • 18: Redistributing static & RIP
  • 19: Redistributing static & OSPF
  • 20: Redistributing static & EIGRP
  • 21: Redistributing static & BGP
  • 22: Redistributing RIP & OSPF
  • 23: Redistributing RIP & EIGRP
  • 24: Redistributing RIP & BGP
  • 25: Redistributing OSPF & EIGRP
  • 26: Redistributing OSPF & BGP
  • 27: Redistributing EIGRP & BGP

MPLS Configure

  • 28: Configuring Basic MPLS
  • 29: Controlling MPLS label distribution.
  • 30: Configuring RD, Route target Import & Export.
  • 31: Configuring MP-IBGP
  • 32: Configuring MP-EBGP
  • 33: Configuring MPLS VPNs with Static routing
  • 34: Configuring MPLS VPNs with RIP routing
  • 35: Configuring MPLS VPNs with EIGRP (same & different ASN) routing.
  • 36: Configuring MPLS VPNs with IS-IS routing.
  • 37: Configuring MPLS VPNs with OSPF (same & different Process ID) routing
  • 38: Configuring MPLS VPNs with OSPF Domain ID.
  • 39: Configuring MPLS VPNs with OSPF routing & Verify LSA 1 & 2 at local site convert into LSA 3 at remote site.
  • 40: Configuring MPLS VPNs with OSPF routing & Verify LSA 3 at local site convert into LSA 3 at remote site.
  • 41: Configuring MPLS VPNs with OSPF routing & Verify LSA 5 at local site convert into LSA 5 at remote site.
  • 42: Configuring MPLS VPNs with OSPF routing & Verify LSA 7 at local site convert into LSA 5 at remote site.
  • 43: Configuring MPLS VPNs with OSPF routing & Sham-link.
  • 44: Verification of OSPF Down bit & Routing bit.
  • 45: Verification of OSPF Tag field.
  • 46: Configuring MPLS VPNs with Extranet
  • 47: Configuring MPLS VPNs with Export map
  • 48: Configuring MPLS VPNs with Import map
  • 49: Configuring MPLS VPNs with EBGP routing having same & different ASN.
  • 50: Configuring MPLS VPNs with Route Reflectors.
  • 51: Configuring MPLS VPNs with EBGP ( Hub & Spoke).
  • 52: Configuring Central Services MPLS VPN.
  • 53: Configuring MPLS VPNs with VRF-LITE.
  • 54: Configuring Inter-AS MPLS VPNs with Back-to-Back VRF.
  • 55: Configuring Inter-AS MPLS VPNs with MP-EBGP for VPNV4 exchange.
  • 56: Configuring Internet access with global routing table.
  • 57: Configuring Internet access with VRF.
  • 58: Configuring MPLS VPNs with MPLS TE – Dynamic PE to PE Tunnels
  • 59: Configuring MPLS VPNs with MPLS TE – Explicit PE to PE Tunnels
  • 60: Configuring MPLS VPNs with MPLS TE – Unequal cost load balancing.